bing tracking image

Mazda Windshield Wipers Installation And Review Videos

  

ClearPlus Intelli Curve Wiper Blade Installation - 2019 Mazda CX-5- Video

ClearPlus Intelli Curve Wiper Blade Installation - 2019 Mazda CX-5

Hey everyone, Shane here with etrailer.com. Today I have a 2019 Mazda CX5 I'm gonna walk through how to install the ClearPlus Intelli Curve windshield wiper blades. If you're looking for new windshield wiper blades for your vehicle, I think the ClearPlus Intelli Curve are gonna be a great option. For a couple reasons. One, where our hinges are they're gonna have a rubber cover over them so that's gonna help the hinges hold up a lot longer, they're not gonna stick, you're not gonna have runs on your windshield when you're trying to clear water, ice, or snow off. It's gonna have a rigid center and a soft outer edge where the hinges are and what that does, it allows it to, not only create more downward pressure in the middle, but it allows the outside of the blades to contour to the glass shape. more


Watch Video

8/29/2022 7:57:27 AM



Rain-X Weatherbeater Wiper Blades Installation - 2012 Mazda 6- Video

Rain-X Weatherbeater Wiper Blades Installation - 2012 Mazda 6

Hi there. Mazda owners. Here your 2012 Mazda 6, we're going to be taking a look at and showing you how to install rain-x's weather beater wiper blades. And while these wiper blades from rain-x they're gonna operate just fine. Everything seems very good here. But in my personal experience with these bladed style ones that have pressure points on them, over time, I found that they tend to chatter. more


Watch Video

11/2/2021 2:48:34 PM



Rain-X Weatherbeater Wiper Blades Installation - 2015 Mazda 5- Video

Rain-X Weatherbeater Wiper Blades Installation - 2015 Mazda 5

Today on our 2015 Mazda 5, we're going to review and install the Rain-X Weather Beater Windshield Wiper Blade part number RX30216 16 inch for the passenger side and part number RX30126 a 26 inch wiper blade for the driver side. Here's what our wiper blades are going to look like once they're installed. This is our frame-styled wiper blade design. It has multiple pressure point arms for uniform pressure, going all the way across the wiper blade. This design meets or exceeds the manufacture's standards. Built into the wiper blade itself are friction reducers for a quite, effortless wipe. more


Watch Video

8/17/2015 1:56:31 PM



Rain-X Weatherbeater Wiper Blades Installation - 2013 Mazda CX-5- Video

Rain-X Weatherbeater Wiper Blades Installation - 2013 Mazda CX-5

Today on this 2013 Mazda CX5 were going to test fit part number RX30224 from Rain-X. This is our Weatherbeater Windshield Wiper Blade. A few things to know about this part, it has a frame style design with multiple pressure points to help keep it attached to the windshield. It has a long-lasting rubber edge with built in UV inhibitors to help protect it from the sunlight. Well start off our test fit by removing the original wiper blades. Now the OEM blades on this vehicle have a small hatch that we have to open up and then we can go ahead and release it from the arm. Once we have the OEM blade removed we can see the arm is a J style so all we have to do is take our new Weatherbeater windshield wiper blade, line it up and slide it into place until it clicks. Alright were done with our drivers side lets go ahead and repeat the same process over on the passenger side. However that uses a different part number due to a different size. more


Watch Video

10/1/2014 12:21:54 PM



Rain-X Latitude Wiper Blades Installation - 2009 Mazda 3- Video

Rain-X Latitude Wiper Blades Installation - 2009 Mazda 3

more


Watch Video

12/20/2012 1:14:42 PM



Rain-X Fusion Wiper Blades Installation - 2011 Mazda 3- Video

Rain-X Fusion Wiper Blades Installation - 2011 Mazda 3

Today, on this 2011 Mazda 3 well be test fitting the Rain-X Fusion wiper blades, driver side part number rx880008 and passenger side part number rx880004. To begin our test fit, we will first need to remove the factory or previously installed wiper blades. This vehicle features a J-hook, so youll push on the black button located at the center of the wiper blade and pull the wiper blade down. We will now go ahead and install the new Rain-X Fusion wiper blades and insert the center of the wiper blade into the J-hook of the wiper arm. Once you hear a click, the wiper blade has been successfully installed. Repeat these steps for the opposite side. more


Watch Video

12/17/2012 9:31:32 AM



Rain-X Repel Wiper Blades Installation - 2011 Mazda 3- Video

Rain-X Repel Wiper Blades Installation - 2011 Mazda 3

more


Watch Video

12/17/2012 9:31:30 AM



  1